Whirlpool W10151595B Manual Do Utilizador

2. Place the hooked end of the neutral wire (white or center wire) 

of power supply cable under the center screw of terminal 
block (hook facing right). Squeeze hooked end together. 
Tighten screw.

3. Place the hooked ends of the other power supply cable wires 

under the outer terminal block screws (hooks facing right). 
Squeeze hooked ends together. Tighten screws.

4. Tighten strain relief screw.

5. Insert tab of terminal block cover into slot of dryer rear panel. 

Secure cover with hold-down screw.

6. You have completed your electrical connections. Now go to 

“Venting Requirements.”

Use for direct wire or power supply cord where local codes do 
not permit connecting cabinet-ground conductor to neutral wire.

1. Remove center terminal block screw.

2. Remove neutral ground wire from external ground conductor 

screw. Connect neutral ground wire and the neutral wire 
(white or center wire) of power supply cord/cable under 
center terminal block screw. Tighten screw.     

   

 

3. Connect the other wires to outer terminal block screws. 

Tighten screws.

4. Tighten strain relief screws.

5. Insert tab of terminal block cover into slot of dryer rear panel. 

Secure cover with hold-down screw.

6. Connect a separate copper ground wire from the external 

ground conductor screw to an adequate ground.