Blaupunkt Monterrey MP35 Manual Do Utilizador
27
FRANÇAIS
ENGLISH
ESP
AÑOL
PORTUGUÊS
EXTERNAL AUDIO SOURCES
Entering the power-on
message
message
After you switch on your device, the
system displays a short message in the
display. The factory default setting is the
“BLAUPUNKT” text. Instead of this you
can enter your own text up to 9 charac-
ters long.
system displays a short message in the
display. The factory default setting is the
“BLAUPUNKT” text. Instead of this you
can enter your own text up to 9 charac-
ters long.
➮
Press the MENU button
7
.
➮
Press the or button
6
repeat-
edly until “ON MSG” appears in the
display.
display.
➮
Press the button
6
.
The default text for the power-on mes-
sage appears in the display. The input
marker flashes at the beginning of the
line.
sage appears in the display. The input
marker flashes at the beginning of the
line.
Note:
●
You can delete the entire line by
pressing and holding down the
pressing and holding down the
or button
6
for longer than
two seconds.
To enter a different text,
➮
select a letter using the or but-
ton
ton
6
.
➮
Move the selection cursor using
the or button
the or button
6
.
Once you have entered the message,
➮
press the MENU button
7
twice.
The settings are saved.
POWER-ON MESSAGE
External audio sources
Instead of connecting a CD changer,
you can connect another audio source
equipped with a line output. The audio
source, for example, can be a portable
CD player, MiniDisc player or MP3 play-
er.
you can connect another audio source
equipped with a line output. The audio
source, for example, can be a portable
CD player, MiniDisc player or MP3 play-
er.
The AUX input must be activated in the
menu.
menu.
If you want to connect an external au-
dio source, you will need an adapter
cable. You can obtain this adapter ca-
ble (BP no.: 7 607 897 093) from your
authorised Blaupunkt dealer.
dio source, you will need an adapter
cable. You can obtain this adapter ca-
ble (BP no.: 7 607 897 093) from your
authorised Blaupunkt dealer.
Switching the AUX input on/off
➮
Press the MENU button
7
.
“MENU” appears in the display.
➮
Press the or button
6
repeat-
edly until “AUX OFF” or “AUX ON”
appears in the display.
appears in the display.
➮
Press the or button
6
to
switch AUX on/off.
When you have finished making your
changes,
changes,
➮
press the MENU button
7
.
Note:
●
If the AUX input is switched on it
can be selected by pressing the
SRC button
can be selected by pressing the
SRC button
;
and it is shown as
“AUX INPUT” on the display.