Blaupunkt HEILBRONN RCC 24 Manual Do Utilizador

23

Heilbronn RCC 24

Turn the set on.

Insert a tape.

Fast Forward
Start/stop:
Press button briefly

Press button firmly
to eject the tape

Insert tape with 
side A or 1 facing up,
the open side facing
to the right

When listening to a tape, the display shows
“TAPE”.
As soon as the end of the tape is reached, the
system switches to radio operation.

We recommend you to use C-60/C-90 tapes
only in your car stereo. Protect your tapes by
storing them away from dirt and dust and do
not expose them to excessive temperatures
(above 50

°

C). In order to ensure smooth tape

operation, cold tapes should be warmed up
before they are played. If dust collects on the
rubber roller or on the audio head, problems
may arise which affect tape operation or
sound quality after approximately 100 hours
of operation.
Normally it is sufficient to use a head cleaning
cassette to clean your tape player; for
tougher cases use a cotton swab (Q-tip)
soaked with alcohol. Never use rigid tools to
clean your unit!

This car radio offers direct software control
(DSC) to adjust a number of default settings
to your personal needs and store them.
The following step describes all the default
settings which can be changed.
To activate the DSC mode,
•

press DSC.

Use the rocker switch to select and change
the following adjustments. The default value
is shown in the display.

Select function

Change

setting

Select function

Change 
setting

To adjust the tuning sensitivity
for local reception
LOCAL 1 - high sensitivity
LOCAL 3 - low sensitivity

To adjust the tuning sensitivity
for distant reception

DIS. 1 - high sensitivity
DIS. 3 - low sensitivity