AMANO PIX-3000XNT - Enterprise Solution Guia De Utilização
PIX-3000x Operations Manual
7
Print Methods
There are three different Print Methods available. The default Print
Method is for Paper Detect Only (P.). If you wish to change the default
Print Method, locate the Print Method Selector on the bottom of the
machine, and move it to the desired position.
Method is for Paper Detect Only (P.). If you wish to change the default
Print Method, locate the Print Method Selector on the bottom of the
machine, and move it to the desired position.
The settings are:
•
Paper Detect Only (P.): This setting will disable the Print Bar and
automatically print when media is inserted into the PIX and contacts
the print margin (Paper Sensor). For this method, you must set a
desired print margin using the Margin Selector.
automatically print when media is inserted into the PIX and contacts
the print margin (Paper Sensor). For this method, you must set a
desired print margin using the Margin Selector.
•
Paper Detect & Print Switch (S.P.): This Print Method is for manual
printing when the alignment of the imprint on your document is
critical. For this method, you must set a desired print margin using
the Margin Selector. To print, insert media into the PIX until it
contacts the print margin, and press the Print Bar.
printing when the alignment of the imprint on your document is
critical. For this method, you must set a desired print margin using
the Margin Selector. To print, insert media into the PIX until it
contacts the print margin, and press the Print Bar.
•
Print Switch Only (S.): This setting will allow you to print manually
regardless of print margin setting by inserting media into the PIX and
pressing the Print Bar.
regardless of print margin setting by inserting media into the PIX and
pressing the Print Bar.
Warning!: Printing when no media is present may cause
damage to the print head.