AMANO PIX-3000XNT - Enterprise Solution Guia De Utilização
PIX-3000x Operations Manual
17
Automatic Daylight Saving Time Adjustment
The PIX-3000x can be programmed to adjust for Daylight Saving Time
automatically. To do so, you must specify the dates that the Daylight
Saving Time period will begin and end. The hour will be added at 2:00
AM on the Begin Date and be subtracted at 2:00 AM on the End Date.
Note: To disable the Automatic Daylight Saving Time Adjustment, set
automatically. To do so, you must specify the dates that the Daylight
Saving Time period will begin and end. The hour will be added at 2:00
AM on the Begin Date and be subtracted at 2:00 AM on the End Date.
Note: To disable the Automatic Daylight Saving Time Adjustment, set
the Begin Date and End Date to the same value.
Daylight Saving Time Begin Date
1. After entering the program mode,
move the cursor under “BEGIN
DAYLIGHT SAVING”.
DAYLIGHT SAVING”.
2. Press
ENTER.
3. The year will begin to flash. Press the
CHANGE button until the correct year
appears in the display, then press
ENTER.
appears in the display, then press
ENTER.
4. The month will start flashing. Press
the
CHANGE button until the correct
month appears in the display, then
press
press
ENTER.
5. The date will start flashing. Press the
CHANGE button until the correct date
appears in the display, then press
ENTER.
appears in the display, then press
ENTER.
6. The entire display will begin flashing.
If the year, month and date are
correct, press
correct, press
ENTER. If not, press the
CHANGE button and return to Step #3.
Daylight Saving Time End Date
1. After entering the program mode,
move the cursor under “END
DAYLIGHT SAVING”.
DAYLIGHT SAVING”.
2. Press
ENTER.
3. Press
the
CHANGE button until the
correct year appears in the display,
then press
then press
ENTER.