AMANO PIX-3000XNT - Enterprise Solution Guia De Utilização
24
PIX-3000x Operations Manual
To program Symbol 1 or Symbol 2, perform the following:
1. With the cover removed, press the
1. With the cover removed, press the
PROGRAM button. Then press the
SYMBOL PRINT BAR on the lower left front corner.
2. Select the Symbol you wish to program, press the
CHANGE button
until SY-1 or SY-2 is displayed, and then press ENTER.
3. The screen will change and "En" will be flashing on the screen.
Press the
CHANGE button and as you do, code "00" will appear.
Continue pressing
CHANGE until the first code on your Symbol Work
Chart appears, then press
ENTER.
4. Once
ENTER is pressed, that code will move to the left, and "00" will
appear to the right. Continue pressing the
CHANGE button until the
second code on the Symbol Work Chart appears and press
ENTER.
Continue this process until the entire code of the string has been
entered. Ensure that there is enough % remaining in your string to
accommodate the “En” end code.
entered. Ensure that there is enough % remaining in your string to
accommodate the “En” end code.
Note: In the upper left hand corner of the display you will see a number.
It is the remaining percentage of available space, which will reduce
as codes are entered.
as codes are entered.
5. A symbol string must have the “En” end code at the end of it to be in
effect. Once the entire code has been entered, press the
CHANGE
button until the “En” end code appears, and then press the
ENTER
button.
6. Press
the
PROGRAM button to enter the string into memory and exit
the programming mode.
7. Insert a piece of paper to test the character string entered.