BMW 2006 750Li Sedan Manual Do Proprietário

Under t

204

Always observe all applicable environ-
mental laws and regulations when dis-

posing of used coolant additives.

Checking coolant level

The engine must be at ambient tempera-
ture.

Turn the cap of the expansion tank counter-
clockwise to allow any accumulated pres-
sure to escape, then continue turning to
open.

The coolant level is correct when the cool-
ant extends to between the MIN and MAX
marks on the filler neck, refer to the diagram
adjacent to the filler neck.

If the coolant is low, slowly add coolant up to
the specified level – do not overfill.

Twist closed the cap and tighten firmly.

Have the reason for the coolant loss elimi-
nated as soon as possible.

Brake system

Malfunction

Brake fluid

The warning lamp lights up and a mes-
sage is shown on the Info Display: stop
immediately.

The brake fluid in the reservoir has fallen to
below the minimum level. At the same time, a
considerably longer brake pedal travel may be
noticeable. Have the system checked immedi-
ately.

Warning lamp on Canadian models

During continued driving increased brake
pedal travel may be necessary, and con-

siderably longer braking distances may result.
Please adapt your driving style accordingly.

Brake pads

For messages and indicator lamps on the Info
Display, refer to page

For your own safety: use only brake pads
that BMW has approved for your particu-

lar vehicle model. As BMW cannot assess the
suitability of other brake pads for use on your
vehicle, we are unable to assume continued
responsibility for the vehicle's operating safety
if non-approved pads are installed.