Roberts DreamTime Manual Do Utilizador
Stereo / Mono setting - FM (Headphones only)
Your clock radio will play stereo FM broadcasts in stereo (via headphones)
provided that the received signal is of adequate strength. However, as
a stereo signal becomes weaker the audio signal will become poorer. It
may be preferable to force the radio to play the station in mono in order
to reduce the level of backgound hiss.
provided that the received signal is of adequate strength. However, as
a stereo signal becomes weaker the audio signal will become poorer. It
may be preferable to force the radio to play the station in mono in order
to reduce the level of backgound hiss.
1. Press the On / Standby button to switch on your clock radio.
2. Tune to the required FM radio station as previously described (see
pages 12, 13).
3. Press and hold the Select button until the display shows “MONO”.
While this setting is engaged, the radio will play the current station in
mono.
mono.
The Mono override is a temporary setting and is applied to the currently
tuned station only. It is cancelled automatically by tuning to another
radio station.
tuned station only. It is cancelled automatically by tuning to another
radio station.
4. If you wish to cancel the Mono override while listening to the currently
tuned radio station, press and hold the Select button until the display
shows “AUTO”. The radio will then play the current station in stereo
(via headphones) if the signal is suffi ciently strong.
shows “AUTO”. The radio will then play the current station in stereo
(via headphones) if the signal is suffi ciently strong.
3,4