Roberts DreamTime Manual Do Utilizador

The wire coloured BLUE must be connected to the terminal marked N or 
coloured BLACK.

The wire coloured BROWN must be connected to the terminal marked L 
or coloured RED.

The DreamTime will operate from a supply of AC 230 volts, 
50Hz 

 only.

DO NOT cut off the mains plug from this equipment. If the plug fi tted is 
not suitable for the power points in your home or the cable is too short to 
reach a power point, then obtain an appropriate safety approved extension 
lead or adaptor. If in doubt consult your dealer.

If the mains plug is cut off for any reason, immediately remove the fuse 
and dispose of the plug to avoid a possible shock hazard by inadvertent 
connection to the mains supply.

If this product is not supplied with a mains plug, or one has to be fi tted, 
then follow the instructions given below:

DO NOT make any connection to the larger terminal which is marked 
with the letter E or by the safety earth symbol  

  or coloured Green or 

Green-and-Yellow.

The wires in the mains lead are coloured in accordance with the following 
codes :-

BLUE - NEUTRAL                    BROWN - LIVE

When replacing the fuse only a 3 Amp ASTA approved to BS1362 type 
should be used. Be sure to re-fi t the fuse cover.

IF IN DOUBT - CONSULT  A  QUALIFIED ELECTRICIAN.

Replacement fuse holders are available from Roberts Radio Technical 
Services at the address shown on the rear of this manual.