Yamaha Boat 60D Manual Do Utilizador

Página de 77
 
Maintenance
 
47
 
neck. If water or foreign matter collects in this
hose, consult a Yamaha dealer.
 
EMU29111
 
Checking wiring and connectors
 
 
Check that each grounding wire is properly
secured.
 
 
Check that each connector is engaged se-
curely.
 
EMU29120
 
Exhaust leakage
 
Start the engine and check that no exhaust
leaks from the joints between the exhaust
cover, cylinder head, and body cylinder.
 
EMU29130
 
Water leakage
 
Start the engine and check that no water
leaks from the joints between the exhaust
cover, cylinder head, and body cylinder.
 
EMU29153
 
Checking power trim and tilt system
WARNING
 
EWM00430 
 
 
Never get under the lower unit while it
is tilted, even when the tilt support lever
is locked. Severe injury could occur if
the outboard motor accidentally falls.
 
 
Make sure no one is under the outboard
 
motor before performing this test.
 
1.
Check the power trim and tilt unit for any
sign of oil leaks.
2.
Operate each of the power trim and tilt
switches on the remote control and en-
gine bottom cowling (if equipped) to
check that all switches work.
3.
Tilt the outboard motor up and check
that the tilt rod and trim rods are extend-
ed completely.
4.
Use the tilt support lever to lock the mo-
tor in the up position. Operate the tilt
down switch briefly so the motor is sup-
ported by the tilt support lever.
 
1. Drain hose
2. Filler neck side
ZMU03898
2
1
ZMU03841
 
1. Tilt rod
2. Trim rods