Williams Sound Universal Remote WIR RX22-4 Manual Do Utilizador

MAN127F

ON/OFF, VOLUME
CONTROL SWITCH

HEADPHONE
JACK

"ON"/LOW
BATTERY INDICATOR

CHANNEL
SELECTOR
KNOB

A131

Figure 2: WIR RX22-4 Control Panel

4. Insert earphone or neckloop into the headphone jack.
5. Turn the receiver on by rotating the Volume control knob.

The ON indicator should illuminate RED.

6. Select a channel by turning the channel selector knob

on the control panel. Choose between 4 standard

frequencies: 2.3 MHz (Ch.1), 2.8 MHz (Ch. 2), 3.3 MHz

(Ch.3), or 3.8 MHz (Ch. 4). Important: Make sure the

receiver frequency matches the transmitter frequency.

IMPORTANT: Make sure the “SoundPlus

IR” artwork on the front

of the unit is not covered while in use. Do not place the receiver

in a pocket or purse, or it will not work properly.
7. Adjust the volume to a comfortable listening level.
8. To turn the receiver off, rotate the Volume control knob

to the left until it clicks off. The ON indicator should not

be lit. To prolong the battery life of the unit, turn the

receiver off when it is not in use.