Panasonic Arbitrator 360 Guia De Utilização

1

1

This is a panel for audio and video control. 

①
②

③

Switch whether the selected audio channel is to be 

recorded or not. The current setting is indicated on 

the button.

: The selected audio channel signal is recorded.

: The selected audio channel signal is not 

recorded.

(See "Turning audio recording On or Off," page 62.)

While a button is held pressed, the corresponding 

audio channel signal will be output from the PC. 

For adjusting the brightness of a dark video image 

on the Main screen. 

Click on the 

[ ]

 or [

]

 button to change the 

setting. The current setting is indicated at the 

center.

Off: No video image enhancing

Low: Low video image enhancing

High: High video image enhancing

This is a panel for operating the color camera. The 

Camera1 tab cannot be selected if no color camera is 

connected to the Memory Card Video Recorder.

①

②

③

④

For adjusting zooming. 

W: For zooming out

T: For zooming in

For adjusting focus. 
Near: For focusing on a object nearby
Auto: For automatic focusing
Far: For focusing on a distant object

Turns the [REC] lamp of the color camera On or 

Off. The current setting is indicated on the left of 

the button.

(See "Turning Off the [REC] lamp of the color 

For adjusting the exposure. The current setting 

value is indicated at the center.
-: Each click on this button decreases the exposure 

value by 1. The value can be decreased to -2.

+: Each click on this button increases the exposure 

value by 1. The value can be increased up to 2.

(See "Adjusting image brightness in record mode,"