BMW 2009 X3 xDrive30i Manual Do Proprietário

Página de 146
Technology for comfort, convenience and safety
54
After releasing the brake, start driving immedi-
ately; otherwise, the acceleration assistant will 
no longer hold the vehicle after approx. 
2 seconds and the vehicle will start to roll back-
ward.
<
Malfunction
The warning lamp for the brake system 
lights up in yellow. The acceleration 
assistant has failed. The vehicle will not 
be held after the brake is released. Have the 
system checked as soon as possible.
Flat Tire Monitor FTM*
The concept
The Flat Tire Monitor detects a pressure loss in 
a tire based on comparing the speeds of the 
individual wheels while driving.
In the event of a pressure loss, a change occurs 
in the rolling circumference and therefore the 
rotation speed of the corresponding wheel. 
This change is detected and signaled as a flat 
tire.
Functional requirement
To ensure the reliable signaling of a flat tire, the 
system must be initialized at the correct tire 
inflation pressure.
The initialization must be carried out after 
each correction of the tire inflation pres-
sure and after every tire or wheel change.
<
System limits
The Flat Tire Monitor cannot predict sud-
den severe tire damage caused by out-
side factors and does not detect a natural, even 
pressure drop in all four tires.
<
In the following situations, the system could be 
delayed or malfunction:
>
When the system has not been initialized
>
When driving on snow-covered or slippery 
road surfaces
>
Sporty driving style: slip in the drive wheels, 
high lateral acceleration.
>
When driving with snow chains
*
When driving with a compact wheel, the Flat 
Tire Monitor cannot operate.
Initializing system
The initialization is completed while driv-
ing and can be interrupted at any time. 
The initialization automatically continues when 
driving resumes. 
Do not initialize the system when driving with 
snow chains
or with a compact wheel.
<
1.
Start the engine just before driving, but do 
not begin to drive.
2.
Press the button for at least 4 seconds, but 
not longer than 2 minutes. After the button 
is released, the indicator lamp in the instru-
ment cluster lights up yellow for a few sec-
onds.
3.
Begin driving.
The initialization is completed while driving, 
without requiring any further input from you.
Indication of a flat tire
The warning lamp lights up red. In addi-
tion, an acoustic signal sounds. There is 
a flat tire or extensive inflation pressure 
loss.
1.
Reduce speed and stop the vehicle care-
fully. Avoid sudden braking and steering 
maneuvers.
2.
Identify damaged tire.
If identification is not possible, con-
tact your BMW Sports Activity Vehi-
cle Center.
<
3.
Replace the damaged wheel, refer to 
Wheel changes on page
.
Online Edition for Part no. 01 41 2 601 104 - © 08/08 BMW AG