BMW 2009 X3 xDrive30i Manual Do Proprietário

 77

Reach into the opening and pull forward, refer 
to arrow.

Before folding down the rear backrests, 
remove the cover caps for the LATCH 

child-restraint system. Otherwise, impressions 
can be left in the seat cushion.

<

When you fold the backrest upright again, 
be sure that the catch engages securely. 

This causes the red warning field in the recess 
to disappear. Otherwise, cargo can be thrown 
into the passenger compartment during brak-
ing or evasive maneuvers, thus endangering the 
passengers.

<

To ensure that the safety belts continue 
to provide optimum protection, please 

follow the instructions on page

<

To create a flat cargo surface, you can remove 
the ski bag and replace it with a tray before fold-
ing the rear backrest forward. The tray is 
inserted in the same way as inserting the ski 
bag, refer to Inserting ski bag on page

76

.

Pull the cargo area cover out by the handle and 
hook it into the rear holders.

You can carry light objects such as articles of 
clothing on the cargo area cover.

Never place heavy, hard objects on the 
cover. If you do so, they could endanger 

passengers during braking or evasive maneu-
vers. 
Do not allow the cover to snap back into place; 
this can damage it.

<

1.

Press the side buttons, refer to arrow

1.

2.

Pull the case toward the rear, refer to 
arrow

2.

Push the case forward into the two side holders 
until it locks into place.

Holders for the case are mounted on the backs 
of the rear seat backs, refer to arrows

1.

Guide the case in from the right side until it 
locks into place, refer to arrow 

2. As you do this, 

the cargo area cover must always point in the 
direction of travel and the loop of the partition 
net must point upward.

Online Edition for Part no. 01 41 2 601 104 - © 08/08 BMW AG