Garmin Columbia 350/400 Manual Do Utilizador
Garmin G1000 Cockpit Reference Guide for the Columbia 350/400
12-16
SECTION 12 – ANNUNCIATIONS
& ALERTS
GMU 44 Message Advisories
Alerts Window Message
Comments
HDG FAULT – AHRS1 magnetometer
fault has occurred.
fault has occurred.
A fault has occurred in the GMU 44. Heading is flagged as invalid. The AHRS uses
GPS for backup mode operation. The G1000 system should be serviced.
GPS for backup mode operation. The G1000 system should be serviced.
MANIFEST – GMU1 software
mismatch. Communication halted.
mismatch. Communication halted.
The GMU 44 has incorrect software installed. The G1000 system should be serviced.
GDL 69 Message Advisories
Alerts Window Message
Comments
GDL69 CONFIG – GDL 69 configura-
tion error. Config service req’d.
tion error. Config service req’d.
GDL 69 configuration settings do not match those of backup configuration memory.
The G1000 system should be serviced.
The G1000 system should be serviced.
GDL69 FAIL – GDL 69 has failed.
A failure has been detected in the GDL 69. The receiver is unavailable. The G1000
system should be serviced
system should be serviced
GDC 74A Message Advisories
Alerts Window Message
Comments
GDC1 CONFIG – GDC1 configuration
error. Config service req’d.
error. Config service req’d.
GDC 74A configuration settings do not match those of backup configuration
memory. The G1000 system should be serviced.
memory. The G1000 system should be serviced.
MANIFEST – GDC1 software
mismatch. Communication halted.
mismatch. Communication halted.
The GDC 74A has incorrect software installed. The G1000 system should be
serviced.
serviced.
BACKUP PATH – ADC1 using backup
data path.
data path.
The GDC 74A is using a backup communications data path. The G1000 system
should be serviced when possible.
should be serviced when possible.
GCU 476 Message Advisories
Alerts Window Message
Comments
GCU CNFG – GCU Config error. Con-
fig service req’d.
fig service req’d.
GCU 476 configuration settings do not match those of backup configuration memory.
The G1000 system should be serviced.
The G1000 system should be serviced.
GCU FAIL – GCU is inoperative.
The GCU 476 has failed. The G1000 system should be serviced when possible.
GCU PATH – A GCU path has failed.
The GCU 476 is using a backup communications data path. The G1000 system
should be serviced when possible.
should be serviced when possible.