Garmin Columbia 350/400 Manual Do Utilizador
Garmin G1000 Cockpit Reference Guide for the Columbia 350/400
SECTION 7 – NAVIGATION
7-3
7.3 AIRPORT INFORMATION
Figure 7-5 Airport Information Page
Select the Airport Information Page
1) Turn the large FMS Knob to select the ‘WPT’
page group.
2) Turn the small FMS Knob to select the first
rectangular page icon.
Enter a Waypoint Facility Name or City Location
1) With the Airport Information Page displayed,
press the FMS Knob to activate the cursor.
2) Turn the large FMS Knob to select the facility
name or location (city) field.
3) Turn the small FMS Knob to select the desired
first character.
4) Turn the large FMS Knob to select the next
character field.
5) Repeat steps 3 and 4 until the facility name or
location is selected, then press the ENT Key.
If there are duplicate names in the database,
If there are duplicate names in the database,
a list is displayed from which to choose the
desired location.
desired location.
6) To remove the flashing cursor, press the FMS
Knob.
Access Runway Information
1) With the Airport Information Page displayed,
press the FMS Knob to activate the cursor.
2) Turn the large FMS Knob to place the cursor
on the ‘RUNWAYS’ identifier field.
3) Turn the small FMS Knob to display the next
runway for the selected airport. Continue
turning the small FMS Knob to select the
desired runway.
turning the small FMS Knob to select the
desired runway.
4) To remove the flashing cursor, press the FMS
Knob.
Access Frequency Information
1) With the Airport Information Page displayed,
press the FMS Knob to activate the cursor.
2) Turn the large FMS Knob to move the cursor to
the Frequencies box.
3) Turn either FMS Knob to scroll through the list,
placing the cursor on the desired frequency. If
a listed frequency has sector or altitude restric-
tions, the frequency is preceded by an info (‘i’)
designation. Press the
a listed frequency has sector or altitude restric-
tions, the frequency is preceded by an info (‘i’)
designation. Press the
ENT Key to view the
information. The following may be displayed
with the frequency:
with the frequency:
• ‘TX’ – transmit only
• ‘RX’ – receive only
• ‘PT’ – part time frequency
• ‘RX’ – receive only
• ‘PT’ – part time frequency
4) Press the ENT Key to place the selected fre-
quency in the standby field of the COM or
NAV.
NAV.
5) To remove the cursor, press the FMS Knob.