Garmin Columbia 350/400 Manual Do Utilizador
Garmin G1000 Cockpit Reference Guide for the Columbia 350/400
SECTION 7 – NAVIGATION
7-6
Access Information on a Specific Airport
1) With the Nearest Airports Page displayed,
select the APT Softkey to place the cursor in
the ‘NEAREST AIRPORTS’ field. The first airport
in the nearest airports list is highlighted.
the ‘NEAREST AIRPORTS’ field. The first airport
in the nearest airports list is highlighted.
2) Press the FMS Knob, then turn the large FMS
Knob to highlight the desired airport.
3) Press the FMS Knob to remove the flashing
cursor.
Access Runway Information for the Selected Airport
1) With the Nearest Airports Page displayed,
select the RNWY Softkey to place the cursor in
the ‘RUNWAYS’ field.
the ‘RUNWAYS’ field.
2) Turn the small
FMS Knob to select the desired
runway.
3) Press the FMS Knob to remove the flashing
cursor.
Quickly Tune the COM Transceiver to a Nearby
Airport Frequency
Airport Frequency
1) With the Nearest Airports Page displayed,
select the
FREQ Softkey to place the cursor in
the ‘FREQUENCIES’ field.
2) Turn either FMS Knob to select the desired
frequency.
3) Press the ENT Key. The selected frequency is
placed in the COM standby frequency field.
4) Press the Frequency Transfer Key to place the
frequency in the active field.
5) Press the FMS Knob to remove the flashing
cursor.
Nearest Airports Information on the PFD
Primary COM Frequency
Identifier
Airport Symbol
Bearing TO
Distance
Runway Length
Figure 7-10 Nearest Airports Window
Select the NRST Softkey to display the PFD
Nearest Airports Window.
Nearest Airports Window.
View Information on a Specific Airport in the List
1) With the Nearest Airports Window displayed,
turn either
FMS Knob to place the cursor on
the desired airport identifier.
2) Press the ENT Key to display airport
information.
3) Press the ENT Key again (cursor is on ‘BACK’)
to return to the list.
Load an Airport COM Frequency into the Active COM
1) With the Nearest Airports Window displayed,
turn either
FMS Knob to place the cursor on
the desired airport frequency shown in the
window.
window.
2) Press the ENT Key and the selected frequency
will be placed in the COM standby frequency
field.
field.
3) Press the Frequency Transfer Key to make the
frequency the active frequency.