Garmin Columbia 350/400 Manual Do Utilizador
Garmin G1000 Cockpit Reference Guide for the Columbia 350/400
8-1
SECTION 8 – FLIGHT PLANNING
SECTION 8: FLIGHT PLANNING
The following discussions pertain to the Multi Function
Display, unless otherwise indicated.
8.1 USER DEFINED WAYPOINTS
Figure 8-1 User WPT Information Page
Select the User WPT Information Page
1) Turn the large FMS Knob to select the ‘WPT’
page group.
2) Turn the small FMS Knob to select the fifth
rectangular page icon.
Create a New User Waypoint
1) With the User Waypoint Information Page
displayed, select the
NEW Softkey. A waypoint
is created at the current aircraft position.
2) Turn the small FMS Knob to enter first character
of the waypoint name.
3) Turn the large FMS Knob to move the cursor to
the next character field.
4) Repeat steps 2 and 3 until the desired name
is entered.
5) Press the ENT Key.
6) Press the ENT Key a again to accept the new
6) Press the ENT Key a again to accept the new
waypoint identifier.
7) The cursor is now in the ‘REFERENCE
WAYPOINTS’ field. If desired, the waypoint can
be defined by a reference waypoint. Turn the
FMS Knobs to enter the position coordinates
or the radial and distance from the reference
waypoint.
be defined by a reference waypoint. Turn the
FMS Knobs to enter the position coordinates
or the radial and distance from the reference
waypoint.
8) Press the FMS Knob to remove the flashing
cursor.
Modify a User Waypoint
1) With the User Waypoint Information Page
displayed, press the
FMS Knob to activate the
cursor.
2) Turn the large FMS Knob to move the cursor to
the desired field and turn the small
FMS Knob
to make changes.
3) Press the ENT Key to accept the changes.
4) Press the FMS Knob to remove the flashing
4) Press the FMS Knob to remove the flashing
cursor.
Delete a User Waypoint
1) Select the User Waypoint Information Page
and press MENU to display the User Waypoint
Information Page Options or select the
Information Page Options or select the
DELETE
Softkey.
2) Turn the large FMS Knob to select ‘Delete User
Waypoint’ and press the ENT Key. The message
‘Would you like to delete the user waypoint’
is displayed. With ‘YES’ highlighted, press the
ENT Key.
‘Would you like to delete the user waypoint’
is displayed. With ‘YES’ highlighted, press the
ENT Key.