BMW 2007 M6 Convertible Manual Do Proprietário

Página de 256
 205
Add at least 0.5 US quart/0.5 liter of oil, other-
wise the oil level check cannot reliably display 
the current oil level.
<
Please conduct a quick measurement 
after adding engine oil to check the oil 
quantity added and to update the display.
<
Continuous exposure to used oil has 
caused cancer in laboratory testing. 
For this reason, thoroughly wash exposed areas 
of skin with soap and water after such work.
Keep oil, grease, etc. out of reach of children 
and observe warnings on containers. Failure to 
do so could pose health risks.
<
Oil change
Have oil changes carried out only by a BMW 
center or a repair shop that works in accordance 
with BMW guidelines and uses appropriately 
trained personnel.
Approved engine oils
The quality of the engine oil selected has critical 
significance for the operation and service life of 
an engine. BMW continuously approves spe-
cific oils after confirming their suitability for use 
in its vehicles with extensive testing.
Do not use oil additives; under some cir-
cumstances, they can damage your 
engine.
<
Your BMW center will be happy to answer 
detailed questions on BMW High Perfor-
mance Synthetic Oil or approved synthetic 
oils.
<
You can also call BMW of North America at 
1-800-831-1117 or visit the website at 
www.bmwusa.com to obtain this information.
Viscosity grades
The viscosity is a measure of the thickness of 
the oil and is specified in SAE grades.
Approved oils belong to the SAE grade 
10W-60.
<
Alternative oil types
If BMW High Performance Synthetic Oil is 
unavailable, you can add small quantities of 
other synthetic oils between oil changes. 
Only use oils with the following specifications:
>
Viscosity
preferred: SAE 10W-60;
alternative: SAE 10W-40, SAE 5W-50 or 
SAE 10W-50
>
Specification
API SJ/CF, API SK/CF or higher
Low ambient temperatures
The oils used by BMW from the factory for your 
vehicle model can be used at virtually all ambi-
ent temperatures. However, if the vehicle is 
operated for a longer period at temperatures 
below –4
7/–206, your BMW center will be 
happy to recommend a suitable oil.
Coolant
Do not open the cooling system when the 
engine is hot. Escaping coolant can cause 
burns.
<
Coolant consists of water and coolant additive. 
Not all commercially available additives are suit-
able for your BMW. Ask your BMW center for 
suitable additives.
Only use suitable additives, otherwise 
engine damage may result. The additives 
present a health hazard.
<
Always observe all applicable environ-
mental laws and regulations when dis-
posing of used coolant additives.
<
Checking coolant level
1.
Allow the engine to cool.
2.
Turn the cap of the expansion tank counter-
clockwise to allow any accumulated pres-
sure to escape, then continue turning to 
open.
Online Edition for Part no. 01 41 0 013 314 - © 02/07 BMW AG