BMW 2007 M6 Convertible Manual Do Proprietário

Maintenance

208

Socket for OBD Onboard

Diagnostics interface

Components which are decisive for the
exhaust-gas composition can be checked via
the OBD socket with a device.
This socket is located under a cover on the left
side of the driver's footwell, directly under the
instrument panel.

Exhaust-gas values

The warning lamp lights up. The
exhaust-gas values are deteriorating.
Have the vehicle checked as soon as

possible.

Display of the previously described
malfunction on Canadian models.

The lamp flashes under certain conditions. This
is a sign of excessive misfiring of the engine. In
this case, you should reduce speed and drive to
the nearest BMW center as soon as possible.
Heavy engine misfiring causes serious damage
to the emission-relevant components, espe-
cially the catalytic converter, within a short time.

If the fuel filler cap is not properly tight-
ened, the OBD system can detect the

escape of fuel vapor. This causes a display to
light up. If the cap is then tightened, the display
should go out within a few days.

Event data recorders

Your vehicle may be equipped with one or sev-
eral measuring and diagnosis modules, or with a
device for recording or transmitting certain
vehicle data or information. If you have also sub-
scribed to a BMW Assist plan, then certain vehi-
cle data can be transmitted or recorded to
enable corresponding services.

Care

Important information on care and maintenance
of your BMW is contained in the Caring for your
vehicle brochure.