BMW 2007 M6 Convertible Manual Do Proprietário

Replacing components

212

Rear turn signals

21-watt bulb, PY21W
The illustrations shows the left section of the
luggage compartment.

Remove the cover.

Unclip the bulb holder and remove.

Apply gentle pressure to the bulb while
turning it to the left for removal and replace-
ment.

License plate lamps

5-watt bulb, W5W

Push a screwdriver from the left under the
lamp and pry out the lamp toward the right.

Turn the bulb holder to the left by 90

5 and

remove.

Remove and replace the bulb.

Repairing flat tire with

M Mobility System

To repair a flat tire, an M Mobility System is pro-
vided in the BMW M6. Using this system you
can apply a sealant in the inside of the tire, seal
off the damaged area, restore the tire inflation
pressure and then continue driving.

Safety measures in case of a breakdown:
Park the vehicle as far as possible from

passing traffic and on solid ground. Switch on
the hazard warning flashers.
Apply the handbrake and engage first gear or
reverse gear with a manual transmission, or
select a drive position with the selector level for
a sequential transmission. Have all vehicle
occupants get out of the vehicle and ensure
that they remain outside the immediate area in a
safe place, such as behind a guardrail.
If a warning triangle

or portable hazard warning

lamp

is required, set it up on the roadside at an

appropriate distance from the rear of the vehi-
cle. Comply with all safety guidelines and regu-
lations.

Preparation

The M Mobility System is located in the lug-
gage compartment under the floor panel flap.
Do not remove foreign bodies which have pen-
etrated the tire if possible.

Corresponding information on using the
M Mobility System are also provided on

the device.

Before using the M Mobility System,
observe the information on the sealant

bottle.