BMW 2007 M6 Convertible Manual Do Proprietário

riv

g ti

uni

iga

lity

Select a message and press the controller.

To exit from the menu immediately:
Select the

arrow and press the controller.

Displaying the urgency of malfunctions

Depending on the equipment, the stored Check
Control messages are also displayed with the
following symbols:

No malfunctions detected in the moni-
tored systems.
Malfunctions detected in the monitored
systems. Depending on the malfunction,
supplementary information is shown on
the Control Display.

The symbols also indicate the status of the ser-
vice requirements display, refer to page

Displays after completion of trip

Malfunction reports generated during the trip
are shown consecutively when you switch off
the ignition.
Before the display disappears, you can display
the messages once again. Press the CHECK
button for approx. 2 seconds. If several mes-
sages are present, you can press the CHECK
button repeatedly.
The display:

turns off automatically after a brief period

can be turned off at any time by pressing
the CHECK button again for approx. 2 sec-
onds

Speed limit

You can enter a speed and a Check Control
message indicates when you have reached
this speed. This enables you, for example, to
receive warnings if you exceed a speed limit in
an urban area.
You are only warned of reaching this speed a
second time if your vehicle speed falls below it
again by at least 3 mph/5 km/h.

Displaying, setting or changing limit

iDrive, for explanation of principle, refer to
page

Open the start menu.

Open "Navigation".
Without navigation system

: open "Car

Data".

Select "Car Data" and press the controller.

Select "Limit" and press the controller.