BMW 2010 M6 Convertible Manual Do Proprietário

Página de 250
 189
Temperature
The temperature grades are A, the highest, B, 
and C, representing the tire's resistance to the 
generation of heat and its ability to dissipate 
heat when tested under controlled conditions 
on a specified indoor laboratory test wheel.
Sustained high temperature can cause the 
material of the tire to degenerate and reduce 
tire life, and excessive temperature can lead to 
sudden tire failure. The grade C corresponds to 
a level of performance which all passenger car 
tires must meet under the Federal Motor Vehi-
cle Safety Standard No. 109. Grades B and A 
represent higher levels of performance on the 
laboratory test wheel than the minimum 
required by law.
The temperature grade for this tire is 
established for a tire that is properly 
inflated and not overloaded. Excessive speed, 
underinflation, or excessive loading, either sep-
arately or in combination, can cause heat 
buildup and possible tire failure.
<
M+S
Winter and all-season tires.
These have better winter properties than sum-
mer tires.
XL
Indicates specially reinforced tires.
Tire condition
Inspect your tires frequently for tread wear, 
signs of damage and for foreign objects lodged 
in the tread. Check the tread depth.
Minimum tread depth
The tread depth should not drop below 0.12 in/
3 mm, although, for example, European legisla-
tion only specifies a minimum tread depth of 
0.063 in/1.6 mm. At tread depths below 0.12 in/
3 mm, there is an increased risk of high-speed 
hydroplaning, even when only small amounts of 
water are present on the road surface.
Winter tires noticeably loose their suitability for 
winter use below a tread depth of 0.16 in/4 mm. 
For the sake of safety, new tires should be 
installed.
Wear indicators at the tread-groove base, refer 
to arrow, are distributed over the tire's circum-
ference and are marked on the side of the tire 
with TWI – Tread Wear Indicator. If the tire tread 
has been driven down to the wear indicators, a 
tread depth of 0.063 in/1.6 mm has been 
reached.
Wheel/tire damage
Please note that low-profile tires cause wheels, 
tires and suspension parts to be more suscep-
tible to road hazards and consequential dam-
ages.
Unusual vibrations encountered during normal 
vehicle operation can indicate tire failure or 
some other vehicle defect. This can, for exam-
ple, be caused by driving over curbs. These 
kinds of problems may also be signaled by other 
changes in vehicle response, such as a strong 
tendency to pull to the left or right.
In these cases, reduce speed immedi-
ately and have wheels and tires thor-
oughly checked. To do so, drive carefully to the 
nearest BMW center or tire shop that works 
according to BMW repair procedures with cor-
respondingly trained personnel. If necessary, 
have the vehicle towed there. Otherwise, tire 
damage can be extremely dangerous to vehicle 
occupants and other road users.
<
New wheels and tires
Have new wheels and tires installed only 
by your BMW center or tire shop that 
works according to BMW repair procedures 
Online Edition for Part no. 01 41 2 602 735 - © 08/09 BMW AG
Online Edition for Part no. 01 41 2 602 735 - © 08/09 BMW AG