BMW 2010 M6 Convertible Manual Do Proprietário

Under t

196

Alternative oil grades

If BMW High Performance Synthetic Oil is
unavailable, you can add small quantities of
other synthetic oils between oil changes.
Only use oils with the following specifications:

Viscosity
preferred: SAE 10W-60;
alternative: SAE 10W-40, SAE 5W-50 or
SAE 10W-50

Specification
API SJ/CF, API SK/CF or higher

Low temperatures

The oils used by BMW from the factory for your
M6 can be used at virtually any ambient tem-
perature. However, if the vehicle is operated for
a longer period at temperatures below –4

–20

6, your BMW center will be happy to rec-

ommend a suitable oil.

Coolant

Do not open the cooling system when the
engine is hot. Escaping coolant can cause

burns.

Coolant is composed of equal parts water and a
coolant additive. Not all commercially available
additives are suitable for your BMW. Ask your
BMW center for suitable additives.

Only use suitable additives, otherwise
engine damage may result. The additives

present a health hazard.

Always observe all applicable environ-
mental laws and regulations when dis-

posing of used coolant additives.

Checking coolant level

Do not open the hood until the engine has
cooled down.

Turn the cap of the expansion tank counter-
clockwise to allow any accumulated pres-
sure to escape, then continue turning to
open.

The coolant level is correct when the upper
end of the float rod is at the same height as
the upper edge of the filler neck, also refer
to the drawing next to the filler neck.

If the coolant is low, slowly add coolant up to
the specified level – do not overfill.

Turn the cap until it clicks.

Have the reason for the coolant loss elimi-
nated as soon as possible.