BMW 2010 M6 Convertible Manual Do Proprietário

riv

g ti

uni

iga

lity

Locking safety belt

Secure the child restraint system with the
belt.

Pull out the belt webbing completely.

Allow the belt webbing to retract and pull
taut against the child restraint system. The
safety belt is locked.

Unlocking safety belt

Open the belt buckle.

Remove the child restraint system.

Allow the belt webbing to retract com-
pletely.

LATCH child restraint fixing

system

LATCH: Lower Anchor and Tethers for Chil-
dren.

Follow the system manufacturer's
instructions on installation and use of

LATCH child restraint systems in order not to
impair their protective function.

Anchor points for LATCH mounts

Before attaching the LATCH child seat, pull the
belt away from the region of the child restraint
fixing system.

Make sure that both of the lower LATCH
mounts have properly clicked into place

and that the child restraint system is resting

snugly against the backrest. Otherwise, the
protective action may be impeded.

Rear seats

The mounting points for the LATCH anchors
are located at the positions indicated by arrows
in the gap between the seat and the backrest.

Upper LATCH retaining strap

Convertible

For Canadian Customers Only
The following statement is required by Trans-
port Canada:
This vehicle is not equipped with user-ready
tether anchorages. As such neither a child
restraint system, nor a booster cushion, requir-
ing the use of a tether strap can be properly
secured in the vehicle.

Coupe

Only use the top tether-strap mounting
points to secure child restraint systems,

otherwise the mounting points could be dam-
aged.

There are two additional mounting points for
child restraint systems with a tether strap, refer
to arrows.