BMW 2010 M6 Convertible Manual Do Proprietário
Driving
56
Radio readiness and ignition switched
off
off
All indicator and warning lamps in the instru-
ment cluster go out.
ment cluster go out.
Starting engine
Do not run the engine in enclosed areas,
otherwise the inhalation of toxic exhaust
otherwise the inhalation of toxic exhaust
gases can cause loss of consciousness and
death. The exhaust gases contain carbon mon-
oxide, an odorless and colorless, but highly
toxic gas.
Never leave an unattended vehicle with the
engine running, as such a vehicle represents a
potential safety hazard.
Before leaving the vehicle with the engine run-
ning, shift into neutral
death. The exhaust gases contain carbon mon-
oxide, an odorless and colorless, but highly
toxic gas.
Never leave an unattended vehicle with the
engine running, as such a vehicle represents a
potential safety hazard.
Before leaving the vehicle with the engine run-
ning, shift into neutral
*
or move the selector
lever into position N and firmly apply the park-
ing brake, otherwise the vehicle can begin to
roll.
ing brake, otherwise the vehicle can begin to
roll.
<
Avoid frequent starting in quick succes-
sion or repeated starting attempts in
sion or repeated starting attempts in
which the engine does not start. Otherwise, the
fuel is not burned or inadequately burned and
there is a danger of overheating and damaging
the catalytic converter.
fuel is not burned or inadequately burned and
there is a danger of overheating and damaging
the catalytic converter.
<
Do not allow the engine to warm up by leaving it
running while the vehicle remains stationary.
Instead, begin to drive at a moderate engine
speed.
running while the vehicle remains stationary.
Instead, begin to drive at a moderate engine
speed.
Manual transmission*
Remote control in ignition lock or with Comfort
Access in vehicle, refer to page
Access in vehicle, refer to page
.
1.
Depress brake pedal.
2.
Depress the clutch pedal and shift into
idling position.
idling position.
3.
Press the Start/Stop button.
Sequential Manual Transmission with
Drivelogic
Drivelogic
Remote control in ignition lock or with Comfort
Access in vehicle, refer to page
Access in vehicle, refer to page
1.
Depress brake pedal.
2.
Place selector lever in position N.
3.
Press the Start/Stop button.
If the engine does not start, shift back to
the last selector lever position selected,
the last selector lever position selected,
refer to the instrument cluster display or the
selector lever. Then select position N.
You cannot start off with the hood open.
When the engine is cold, the exhaust system
has a slightly metallic undertone due to the sys-
tem design.
selector lever. Then select position N.
You cannot start off with the hood open.
When the engine is cold, the exhaust system
has a slightly metallic undertone due to the sys-
tem design.
<
After every engine start, as soon as the selector
lever is pushed to the right into the drive
position
lever is pushed to the right into the drive
position
Β and the brake pedal is pressed, the
Sequential mode is activated.
Switching engine off
When leaving the vehicle, always take the
remote control with you.
remote control with you.
When parking, firmly apply the parking brake, as
otherwise the vehicle could roll.
otherwise the vehicle could roll.
<
Manual transmission*
1.
Press the Start/Stop button with the vehicle
stopped.
stopped.
2.
Shift into first gear or reverse.
3.
Firmly apply the parking brake.
4.
Remove the remote control from the igni-
tion lock, refer to page
tion lock, refer to page
.
Sequential Manual Transmission with
Drivelogic
Drivelogic
1.
Firmly apply the parking brake.
2.
Shift into a driving position.
Online Edition for Part no. 01 41 2 602 735 - © 08/09 BMW AG
Online Edition for Part no. 01 41 2 602 735 - © 08/09 BMW AG