BMW 2010 M6 Convertible Manual Do Proprietário

nolo

r co

mfort

, c

nve

e an

Press the DSC OFF button; the DSC indicator
lamp lights up continuously. DSC and MDM are
deactivated.
A message appears on the Control Display.
Please note any supplementary information
that appears there.
Manual transmission

Press and hold the MDM button.
Under unfavorable traction conditions, the
engine output may be briefly reduced even
when DSC is deactivated.

Reactivating DSC

Press the DSC OFF button; the indicator lamp
in the instrument cluster goes out.
You can also activate and deactivate DSC with
the button on the steering wheel, refer to
MDrive on page

Manual transmission

Press the MDM button.

Malfunction in driving-stability control
systems

The warning lamp for the brake system
lights up yellow, together with the indi-
cator lamps for ABS, DSC and Tire
Pressure Monitor or Flat Tire Monitor.
A message appears on the Control Dis-
play. The driving stability control sys-
tems have failed. While you may con-
tinue, you should remember to proceed
cautiously and drive defensively while
avoiding full brake applications. The

Tire Pressure Monitor or the Flat Tire Monitor is
also malfunctioning. Have the system checked
as soon as possible.

Display of the previously described
malfunction in Canadian models.

The DSC warning lamp lights up. A
malfunction has occurred in DSC
including MDM. The stability mainte-

nance functions are no longer available. The
vehicle remains operational. Have the system
checked as soon as possible.

The brake system warning lamp lights
up yellow. A message appears on the
Control Display. The brake assistant is

defective. Have the system checked as soon as
possible.

Display of the previously described
malfunction in Canadian models.

Starting off

On slopes

The drive-off assistant enables you to start off
conveniently on slopes. The parking brake is
not required for this purpose.

Hold the vehicle with the brake.

Release the brake and begin to drive imme-
diately.

After releasing the brake, begin to drive
immediately; otherwise, the drive-off

assistant no longer holds the vehicle after
approx. 2 seconds and your vehicle will start to
roll backward.

Start off quickly on slopes. Do not hold
the vehicle on a hill by pressing the accel-

erator, but apply the brake pedal or parking
brake instead. Otherwise overheating and
heavy wear can result in the area of the Sequen-
tial Manual Transmission.

To protect the clutch of the Sequential Manual
Transmission from overheating, the starting-off