BMW 2010 M6 Convertible Manual Do Proprietário

Página de 250
 81
Indication of a flat tire
The warning lamp lights up red. A mes-
sage appears on the Control Display. 
In addition, an acoustic signal sounds. 
There is a flat tire or extensive inflation pressure 
loss.
1.
Reduce speed and stop the vehicle care-
fully. Avoid sudden braking and steering 
maneuvers.
2.
Identify damaged tire. To do this, check the 
tire inflation pressure using the M Mobility 
System, refer to Producing tire inflation 
pressure on page
.
3.
Repair the flat tire with the M Mobility Sys-
tem, refer to page
, or replace the dam-
aged wheel, refer to Changing wheels on 
page
TPM Tire Pressure Monitor*
The concept
TPM checks the tire inflation pressure in the 
four mounted tires. The system reports when 
the tire inflation pressure has dropped consid-
erably in one or several tires.
Functional requirement
In order to assure the reliable reporting of a flat 
tire, the system must have been reset with the 
correct tire inflation pressure.
Always use wheels with TPM electronics, oth-
erwise fault-free operation of the system is not 
ensured.
Reset the system again after each correc-
tion of the tire inflation pressure and after 
every tire or wheel change.
<
System limits
TPM cannot announce sudden serious 
tire damage caused by external influ-
ences.
<
The system does not function properly if it has 
not been reset, e.g. a flat tire is reported despite 
correct tire inflation pressures.
The system is inactive and cannot display a flat 
tire if a wheel has been mounted without TPM 
electronics, or if TPM is temporarily interfered 
with by other systems or devices which use the 
same radio frequency.
Status display on Control Display
The tire and system status is indicated by the 
color of the tires.
TPM takes the fact that the tire pressure 
changes during driving into account. A correc-
tion is only required if requested by TPM with 
the color.
Green
The tire pressure matches the learned set state.
"TPM" appears on the Control Display.
One wheel is yellow
Flat tire or a major drop in inflation pressure in 
the indicated tire. A message appears on the 
Control Display.
All wheels are yellow
Flat tire or a major drop in inflation pressure in 
several tires. A message appears on the Control 
Display.
Gray
The system cannot detect a flat tire.
Reasons for this can be:
>
TPM is being reset
>
Temporary interference due to systems or 
devices which use the same radio fre-
quency
>
Malfunction
Resetting system
Reset the system again after each correc-
tion of the tire inflation pressure and after 
every tire or wheel change.
<
Resetting finishes during driving, which can be 
interrupted at any time. When driving resumes, 
resetting is continued automatically.
iDrive, for operating principle refer to page
.
Online Edition for Part no. 01 41 2 602 735 - © 08/09 BMW AG
Online Edition for Part no. 01 41 2 602 735 - © 08/09 BMW AG