Brocade Communications Systems Switch 53-1001762-01 Manual Do Utilizador
Converged Enhanced Ethernet Command Reference
159
53-1001762-01
spanning-tree priority
9
DRAFT: BROCADE CONFIDENTIAL
spanning-tree priority
Changes an interface's spanning-tree port priority.
Synopsis
spanning-tree priority priority
no spanning-tree priority priority
Operands
priority
Specifies the interface priority for the spanning tree. The range of valid values
is 0-240. Port priority is in increments of 16.
is 0-240. Port priority is in increments of 16.
Defaults
The default value is 128.
Command
Modes
Interface configuration mode
Description
Use this command to change an interface's spanning-tree port priority. Use the no spanning-tree
priority command to return to the default setting.
priority command to return to the default setting.
Usage
Guidelines
There are no usage guidelines for this command.
Examples
To configure the port priority to 16:
switch(conf-if-te-0/1)#spanning-tree priority 16
See Also
spanning-tree cost, show spanning-tree