BMW 2005 745i Sedan Manual Do Proprietário
Prac
tic
a
l in
te
rio
r
ac
ce
ss
ori
e
s
112
Practical interior accessories
Integrated universal remote
control*
control*
The concept
The integrated universal remote control can
replace as many as three hand-held trans-
mitters for various remote-controlled
accessories, such as door openers and
house alarm systems. The integrated uni-
versal remote control registers and stores
signals from the original hand-held trans-
mitters.
replace as many as three hand-held trans-
mitters for various remote-controlled
accessories, such as door openers and
house alarm systems. The integrated uni-
versal remote control registers and stores
signals from the original hand-held trans-
mitters.
The signal of an original hand-held trans-
mitter can be programmed on one of the
three memory keys 1. Following that, each
of the devices can be actuated with the
appropriately-programmed memory key 1.
The indicator lamp 2 flashes to confirm
transmission of the signal.
mitter can be programmed on one of the
three memory keys 1. Following that, each
of the devices can be actuated with the
appropriately-programmed memory key 1.
The indicator lamp 2 flashes to confirm
transmission of the signal.
Should you sell your vehicle one day, be
sure to delete the stored programs before-
hand for your safety, refer to page
sure to delete the stored programs before-
hand for your safety, refer to page
To prevent possible damage or injury,
before programming or using the inte-
before programming or using the inte-
grated universal remote control, always
inspect the immediate area to make certain
that no people, animals or objects are
within the swiveling and movement range
of the device. Also, comply with the safety
precautions of the original hand-held trans-
mitter.
inspect the immediate area to make certain
that no people, animals or objects are
within the swiveling and movement range
of the device. Also, comply with the safety
precautions of the original hand-held trans-
mitter.
<
Checking compatibility
If you see this symbol on the pack-
aging or in the manual supplied with
the original hand-held transmitter, it
aging or in the manual supplied with
the original hand-held transmitter, it
is safe to assume that it is compatible with
the integrated universal remote control.
the integrated universal remote control.
If you have additional questions,
please consult your BMW center or
please consult your BMW center or
call 1-800-355-3515.
You can also visit these websites:
www.bmwusa.com or
www.homelink.com.
You can also visit these websites:
www.bmwusa.com or
www.homelink.com.
HomeLink is a registered trademark owned
by Johnson Controls, Inc.
by Johnson Controls, Inc.
<
Programming
1
Memory keys
2
Indicator lamp
Fixed-code hand-held transmitter
1.
Switch on the ignition
2.
When using for the first time: press both
outer keys 1 for approx. 20 seconds,
maintaining pressure until the indicator
lamp 2 starts to flash. The three mem-
ory keys 1 are cleared
outer keys 1 for approx. 20 seconds,
maintaining pressure until the indicator
lamp 2 starts to flash. The three mem-
ory keys 1 are cleared
3.
Hold the original hand-held transmitter
at a distance of approx. 2 in/5 cm to
8 in/20 cm from the memory keys 1
at a distance of approx. 2 in/5 cm to
8 in/20 cm from the memory keys 1
The required distance between
the hand-held transmitter and
the hand-held transmitter and
memory keys 1 depends on the relevant
system of the original hand-held trans-
mitter used.
system of the original hand-held trans-
mitter used.
<
4.
Simultaneously press the transmit key
on the original hand-held transmitter
and the desired memory key 1 of the
integrated universal remote control.
Initially, the indicator lamp 2 flashes
slowly. Release both keys as soon as
the indicator 2 lamp flashes rapidly. If
the indicator lamp 2 does not flash rap-
idly after approx. 15 seconds, change
the distance
on the original hand-held transmitter
and the desired memory key 1 of the
integrated universal remote control.
Initially, the indicator lamp 2 flashes
slowly. Release both keys as soon as
the indicator 2 lamp flashes rapidly. If
the indicator lamp 2 does not flash rap-
idly after approx. 15 seconds, change
the distance
5.
To program other original hand-held
transmitters, repeat steps 3 and 4.
transmitters, repeat steps 3 and 4.
Online Edition for Part-No. 01 41 0 159 154 - © 09/04 BMW AG