BMW 2005 745i Sedan Manual Do Proprietário

Whee

and

tires

192

Run-flat tires*

You will recognize run-flat tires by a circular
symbol containing the letters RSC on the
side of the tire.
The run-flat tires consist of self-supporting
tires and special rims. The tire reinforce-
ment ensures that the tire retains some
residual safety in the event of pressure
drop and driving remains possible to a
restricted degree.

Continuing driving with a damaged
tire

Driving on run-flat tires can continue,
depending on the vehicle load and the
severity of the tire damage, at a maximum
speed of 50 mph/80 km/h.

In the case of complete inflation pressure
loss, 0 psi/kPa, or obvious tire damage,
you can estimate the possible distance for
continued driving on the basis of the fol-
lowing guide values:

With low load:
1 to 2 persons without luggage:
Approx. 155 miles/250 km

With medium load:
2 persons, luggage compartment full, or
4 persons without luggage:
Approx. 90 miles/150 km

With full load:
More than 4 persons, luggage compart-
ment full:
Approx. 30 miles/50 km.

Drive reservedly and do not exceed a
speed of 50 mph/80 km/h. With infla-

tion pressure loss, the driving characteris-
tics change, for example reduced track
stability on braking, extended braking dis-

tance, and altered self-steering character-
istics.
For safety reasons BMW recommends that
you do not have damaged run-flat tires
repaired, and that you go to a BMW center
in this case.

New wheels and tires

Only have new wheels and tires
mounted by a specialist. If this work is

not carried out properly, there is a danger
of subsequent damage and related safety
hazards.

You can ask your BMW center for the right
wheel and tire combination. Have the
wheel and tire assemblies balanced every
time either a wheel or a tire is replaced.

The correct wheel and tire combination
affects various systems whose function
would otherwise be impaired, e.g. ABS
or DSC.

BMW does not recommend the use of
retread tires, as otherwise driving

safety may be reduced. Possible variations
in the design and the age – which could be
substantial – of the carcasses can lead to
unusually rapid wear.

The right wheels and tires

BMW recommends that you use only
wheel and tire combinations that

BMW has tested and approved for your
particular vehicle. Variations in factors such
as manufacturing tolerances mean that
even wheels and tires with identical official
size ratings could actually have different
dimensions than the approved units – these
differences could lead to body contact, and
with it the risk of severe accidents. If non-
approved wheels and tires are used, BMW
cannot evaluate their suitability, and there-
fore cannot be held liable for driving
safety.

To maintain good handling and vehicle
response, use only tires of a single tread
configuration from a single manufacturer.
After a flat tire, always remember to have
the original wheel and tire combination