BMW 2005 745i Sedan Manual Do Proprietário

Página de 239
 209
Giving and receiving assistance 
Warning triangle* 
The warning triangle is conveniently stored 
in the onboard tool kit mounted on the 
inside of the luggage compartment lid. 
Comply with legal requirements 
requiring you to carry a hazard warn-
ing triangle in the vehicle.
<
 
First-aid kit* 
You will also find the first-aid kit in the 
onboard tool kit's container. 
Some of the articles contained in the 
first-aid kit have a limited service life. 
Therefore, check the expiration dates of the 
contents regularly and replace the contents 
concerned in good time if necessary. You 
can find replacements in any pharmacy. 
Comply with legal requirements requiring 
you to carry a first-aid kit in the vehicle.
<
 
Jump-starting 
When your battery is discharged you can 
use two jumper cables to start your vehicle 
with power from the battery in a second 
vehicle. You can also use the same method 
to help start another vehicle. Use only 
jumper cables with fully-insulated terminal 
clamps.
To avoid the risk of potentially fatal 
injury, always avoid all contact with 
electrical components while the engine is 
running. Carefully adhere to the following 
sequence, both to prevent damage to one 
or both vehicles, and to guard against pos-
sible personal injury.
<
 
Preparing
1.
Check whether the battery of the other 
vehicle has a voltage of 12 Volts and 
approximately the same capacitance 
in Ah. This information can be found on 
the battery 
2.
Switch off the engine of the support 
vehicle
3.
Switch off any electrical systems and 
components in both vehicles. 
Ensure that no contact exists 
between the bodywork on the two 
vehicles, otherwise there is a danger of 
short circuits.
<
 
Connecting jumper cables
To avoid personal injury from sparks, 
always observe this sequence when 
connecting jumper cables.
<
 
Your BMW is equipped with an auxiliary 
terminal specifically designed for jump-
starting. It is located within the engine 
compartment, refer to arrow 1 in the illus-
tration. The symbol + is embossed on the 
cover. 
1.
Remove the cover of the BMW auxiliary 
terminal for jump-starting 
2.
Connect one terminal clamp of the pos-
itive/+ jumper cable to the positive ter-
minal of the battery or an auxiliary termi-
Online Edition for Part-No. 01 41 0 159 154 - © 09/04 BMW AG