BMW 2005 745i Sedan Manual Do Proprietário

Página de 239
Driving
64
Should exceptional circumstances 
render it necessary for you to switch 
off the engine while the vehicle is moving, 
press the start/stop button for approxi-
mately 1 second. 
If you maintain pressure on the start/stop 
button for longer than two seconds while 
switching off the ignition, the remote con-
trol will be ejected.
<
 
Before leaving the vehicle, remove 
the remote control from the ignition 
lock; with Comfort Access, always take the 
remote control with you.
Parking brake 
The concept 
Your BMW is equipped with an electrome-
chanical parking brake. 
The parking brake is primarily intended to 
prevent the vehicle from rolling while 
parked. 
You can operate or use the parking brake in 
two different ways: 
>
Manually, by briefly pressing the button
>
Automatically, through activation of the 
Automatic Hold mode, refer to page
An electrohydraulic mechanism then 
engages the parking brake to prevent the 
rear wheels from turning whenever you 
switch off the engine. 
When the engine is running, parking brake 
engagement is controlled by the brake sys-
tem's hydraulic circuits, which act on the 
disc brakes at the front and rear wheels. 
Brake pedal feel 
Because this function is activated using 
the brake system's hydraulic circuits, the 
response of the brake pedal may change 
slightly. Engagement may also be accom-
panied by activation noise – this is normal. 
Manual engagement 
Briefly press the button, the 
word PARK appears briefly in 
the Info Display. With the park-
ing brake engaged, the indica-
tor lamp
lights up red in 
the Info Display, refer to page
With the ignition off, the indicator 
lamp
goes out after a brief 
period.
<
 
Manual release 
With the ignition on, briefly 
press the button: the indicator 
lamp in the Info Display goes 
out.
Provided that the remote control is 
inserted in the ignition lock, you can 
also release the parking brake after the 
engine has been switched off. This function 
is intended for use in automatic car 
washes, etc.
<
 
When leaving the vehicle, always 
release the remote control from the 
detent in the ignition lock; this precaution 
prevents children from disengaging the 
parking brake, etc. 
The parking brake can still be engaged at 
any time when the remote control is 
released from the detent. It is only possible 
to disengage the parking brake with the 
ignition on.
<
If exceptional circumstances should 
make it necessary to engage the 
parking brake while the vehicle is in motion, 
maintain pressure on the button. 
The indicator lamp appears in red in the 
Info Display. A gong sounds at the same 
Online Edition for Part-No. 01 41 0 159 154 - © 09/04 BMW AG