BMW 2005 745i Sedan Manual Do Proprietário

Página de 239
 91
Technology for comfort, convenience 
and safety
PDC Park Distance Control* 
The concept 
The PDC assists you when you are parking. 
Signal tones indicate the current distance 
to an object behind or in front of your vehi-
cle. Four ultrasonic sensors in both the 
bumpers monitor the distance to the near-
est object. The sensors at the front and at 
the two rear corners have a range of 
approx. 2 ft/60 cm; the rear middle sensors 
have approx. 5 ft/1.50 m. 
PDC is a parking aid that can indicate 
objects when they are approached 
slowly, as is usually the case when parking. 
Avoid approaching an object at high speed, 
as otherwise the physical circumstances 
would mean that the system warning was 
too late.
<
 
Automatic function 
Whenever the ignition is on the system 
automatically assumes operational status 
after a few seconds each time you engage 
the transmission position R. 
Wait this short period before revers-
ing.
<
 
Switching on manually
Press the button, the indicator lamp lights 
up. 
Manual deactivation 
Press the button again; the indicator lamp 
goes out. 
Automatic deactivation 
The system is automatically deactivated 
once the vehicle travels approx. 165 ft/
50 m or exceeds a speed of roughly 
20 mph/30 km/h; the indicator lamp goes 
out. You can reactivate the system manu-
ally as needed. 
Signal tones 
The signal indicating the distance to the 
nearest obstacle is directional. Thus, an 
object detected to the left rear of the vehi-
cle will be indicated by a signal tone from 
the left rear speaker, etc. As the distance 
between vehicle and object decreases, the 
intervals between the tones become 
shorter. The signal tone becomes continu-
ous once the distance to the nearest object 
falls to below roughly 1 ft/30 cm. 
The warning signal is canceled after 
approx. 3 seconds if you are moving paral-
lel to a wall. 
Malfunction 
The indicator lamp within the button flashes 
and a status message appears in the Check 
Control. PDC has failed. Switch off PDC. 
Have the system checked.
To prevent this problem, keep the sensors 
clean and free of ice or snow in order to 
ensure that they will continue to operate 
effectively. 
Online Edition for Part-No. 01 41 0 159 154 - © 09/04 BMW AG