West Elm Narrow Leg 5 Drawer Dresser Instrução De Montagem

narrow leg 5 drawer dresser

assembly instructions

Page 4 of 4

 9951971/9951963/9951955/9951989

OVER BALANCE . To prevent injury and property damage from unexpected tipping of furniture, we highly recommend

    installation of the overbalance protection hardware included with this product

.

   1.  Attach the mounting bracket horizontally to the top back edge of the furniture. Insert th

e

   2.  Determine where the furniture is to be placed and mark location on the wall for the other

 

        mounting bracket screw holes. It should be placed approximately 2” below the bracket mounted

        to the furniture.

   3.  Attach the mounting bracket vertically to the wall by inserting the long screws provided through 

        the holes in the bracket and tightening securely using screwdriver.

        short screws through the holes in the bracket and tighten securely using screwdriver.

   4.  Place the furniture so the bracket on the back edge is in line with the bracket on the wall.

   5.  Lace an end of the nylon restraint strap down through each bracket. Bring both ends together

        and slide the thin end of the strap through the receiving end of the strap until snug.

   6.  Check to make sure the strap is securely laced and locked to the brackets.

back side

wall

Mounting Plate 2x

Nylon Strap 1x

Small Screw 2x Large Screw 2x

Anti tip kit