West Elm Parsons Drawer Unit Instrução De Montagem

parsons drawer unit

assembly instructions

Page 3 of 3

9285289 - 01/02/09

CARE INSTRUCTIONS
 

Hardware may loosen overtime. Periodically check that all connections are tight.

 

Wipe with a soft, dry cloth. To protect fi nish, avoid the use of chemicals and household cleaners.

NOTICE:  To prevent injury and property damage from unexpected tipping of furniture, we highly 
 

    recommend installation of the anti-tip kit included with this product. 

Attaching unit to wall with anti-tip kits.

1. Determine where the unit is to be placed and mark location on the wall for the mounting bracket
     screw holes. They should be placed approximatly 1” below the top on the back of the unit.
2. Attach the mounting bracket vertically to the wall by inserting the long screws provided through the 
     holes in the bracket and tightening securely using screwdriver. Screws must penetrate wall studs for 
     proper installation. 
3. Next using the short screws attach the 2nd bracket to the back of the unit top.
4. Lace the nylon strap down through the brackets. Slide the thin end of the strap through the
     receiving end of the nylon strap. Pull to tighten tower snug against wall.

Long Screw

Short Screw

Adjustable levelers are installed in the legs to
accommodate uneven fl ooring. To adjust these levelers, 
simply turn them counterclosckwise to raise the leg.