WatchGuard Technologies Firebox SOHO 6.1 Manual Do Utilizador
Chapter 10: Support Resources
114
WatchGuard Firebox SOHO 6.1
5
Enter the protocol number to allow in the Protocol field.
6
Click Submit.
7
From the navigation bar on the left side, select
Firewall => Incoming.
Firewall => Incoming.
The Firewall Incoming Traffic page appears.
8
Near the bottom of the page, under the Custom Service header,
locate the service you created and select Allow from the drop
list.
locate the service you created and select Allow from the drop
list.
9
Under the header Service Host, enter the IP address of the
computer to which this traffic is allowed.
computer to which this traffic is allowed.
10 Click Submit.
VPN Management
Before setting up VPN, you must have:
• Two properly configured and working SOHO 6s or one
SOHO 6 with the latest version of firmware and one Firebox
II/III. Each SOHO 6 must have the VPN option activated.
II/III. Each SOHO 6 must have the VPN option activated.
• The static external IP address, the network address, and the
subnet masks of both appliances. (The base trusted IP
address of each SOHO 6 must be static and unique.)
address of each SOHO 6 must be static and unique.)
• The DNS and WINS server IP address, if used.
• The shared key (passphrase) for the tunnel.
• The same encryption method for each end of the tunnel
(DES or 3DES).
• The same authentication method for each end
(MD-5 or SHA-1).