Honeywell Garage Door Opener 6160EX Manual Do Utilizador

Página de 18
6.  After second double beep the card has been added successfully. 
Note: 
If at any time a triple bleep is heard, the learn procedure has 
failed. 
Removing Keytags 
 Any keytag can be removed from the system as follows: 
1.  Enter master user code, 8 (CODE), and user number (1-8). 
2.  Wait a couple of seconds for a double beep. 
3.  Press *. A double beep confirms deletion. 
Adding and Changing User Codes 
The system can support up to 8 User Codes. User number 1 is the 
Master Code. Users 2 to 8 are normal User Codes. The Master Code 
can alter the 4-digit code for itself and other User Codes, and add new 
User Codes. Normal Users can only change their own code. 
To change or add a user code: 
1.  Enter master user code or the user code to be deleted 
2.  Press 8 (CODE).  
3.  Press the user number that you want to program (1 to 8). 
4.  Enter the new 4-digit code. A double beep confirms the code 
change. 
To delete a user code: 
1.  Type in the master user code or the User Code to be deleted. 
2.  Press 8 (CODE). 
3.  Press the user number to be deleted (2 to 8). 
4.  Press *. A double beep confirms deletion. 
Note: The Master Code cannot be deleted. 
Duress Code 
The Installer can enable user 8 as a Duress code. If this is has been 
enabled, the User 8 Code can set and unset the system normally. This 
only difference is that a Duress signal will be transmitted to the 
monitoring station each time that it is entered. No audible or visible 
indication will be given. 
13