Whirlpool W10120510A Manual Do Utilizador

Página de 20
10
To Adjust Oven Temperature Calibration (on models with 
manual oven control):
1. Make sure the oven temperature control knob is in the Off 
position. Pull oven temperature control knob straight off and 
turn it over.
2. Loosen the locking screws inside the oven temperature 
control knob.
3. Adjust temperature.
To lower the temperature, hold the knob handle firmly and 
turn skirt counterclockwise to move the tooth a notch to the 
left.
To raise the temperature, hold the knob handle firmly and turn 
the skirt clockwise to move the tooth a notch to the right.
Each notch equals about 5°F (3°C).
4. Tighten the locking screws and replace knob.
OVEN USE
Odors and smoke are normal when the oven is used the first few 
times, or when it is heavily soiled.
IMPORTANT: The health of some birds is extremely sensitive to 
the fumes given off. Exposure to the fumes may result in death to 
certain birds. Always move birds to another closed and well-
ventilated room.
Aluminum Foil
IMPORTANT: To avoid permanent damage to the oven bottom 
finish, do not line the oven bottom with any type of foil, liners or 
cookware.
Do not cover entire rack with foil because air must be able to 
move freely for best cooking results.
To catch spills, place foil on rack below dish. Make sure foil is 
at least ½" (1.3 cm) larger than the dish and that it is turned 
up at the edges.
Positioning Racks and Bakeware
IMPORTANT: To avoid permanent damage to the porcelain 
finish, do not place food or bakeware directly on the oven door or 
bottom.
RACKS
NOTES:
Position racks before turning on the oven. 
Do not move racks with bakeware on them. 
Make sure racks are level. 
To move a rack, pull it out to the stop position, raise the front 
edge, then lift out. Use the following illustration and chart as a 
guide.
A. Locking screws
B. Notches
A. Notches
B. Tooth
C. Skirt
A
B
A
B
C
1
2
3
4
5