Whirlpool W100329708 Manual Do Utilizador

Gather the required tools and parts before starting installation. 
Read and follow the instructions provided with any tools listed 
here.

Check that all parts are included. 

■

Anti-tip bracket must be securely mounted to subfloor. 
Thickness of flooring may require longer screws to anchor 
bracket to subfloor. Longer screws are available from your 
local hardware store.

Check local codes and consult gas supplier. Check existing gas 
and electrical supply. See “Electrical Requirements” and “Gas 
Supply Requirements” section.

In the State of Massachusetts, the following installation instructions apply:

■  

Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by 

the State of Massachusetts.

■  

If using a ball valve, it shall be a T-handle type.

■  

A flexible gas connector, when used, must not exceed 3 feet.

■

Level

■

³⁄₈" drive ratchet

■

Tape measure

■

Flat-blade screwdriver

■

Phillips screwdriver

■

Hand or electric drill

■

Wrench or pliers

■

7 mm combination wrench

■

Pipe wrench

■

¹⁄₈" (3.2 mm) drill bit (for wood floors)

■

³⁄₁₆" (4.8 mm) carbide-tipped masonry drill bit (for concrete/
ceramic floors)

■

Pipe-joint compound resistant to LP gas

■

Noncorrosive leak-detection solution

¹⁄₂" screws (2)