Bosch Appliances Automobile Electronics LBB 4188 Manual Do Utilizador

DCN Next Generation Automatic Camera Control 

en | 14 

 

To enable the settings window: 

•  Click on the ‘Settings…’ menu. 

The following window appears. 

 

3.3.1

  Screenline usage 

When enabled, this option takes the screenline (text 
displayed on the audience monitor) as defined in the 
Delegate Database software. The option is enabled 
by default. To enable/disable this option: 

•  Click on the ‘Screenline usage’ check box. 

A tick mark (√) appears to indicate that this option 
has been enabled. 
 

 i 

   Note 

If the ‘Double text’ option is selected, two lines 
of 16 characters can be displayed. Otherwise, 
only one line of 16 characters can be shown. 

 i 

   Note 

If no names file is currently open (as specified 
in Delegate Database) or this option is de-
selected (off), the seat text (as specified in the 
main window) is displayed. The Automatic 
Camera Control software for standalone CCU 
systems always displays the unit text (the 
‘Screenline usage’ option is not displayed). 

3.3.2

  Double seat (or unit) text 

An additional line of text can be entered for each 
seat (or unit). The text appears on both the operator 
monitor and audience monitors. By default, this 
option is not enabled. To enable the option: 

•  Click on the ‘Double seat (or unit) text’ check 

box. 

 
 

A tick mark (√) appears to indicate that this option 
has been enabled. The ‘Seat (or Unit) text:’ edit field 
now appears as follows: 

 

3.3.3

  Camera override 

The ‘Camera override’ option allows you to determine 
whether a newly switched on microphone 
automatically activates the camera covering its 
position, or whether the camera is only activated 
when the current microphone is switched off. To 
activate this option: 

•  Click on the ‘Camera override’ check box. 

3.3.4

  Camera movement time 

To hide camera movement (as a preposition camera 
moves from one position to the next), the overview 
camera can be activated and displayed during the 
movement. This option enables the period for which 
the camera movement is hidden to be set between 
0.5 seconds and 60 seconds in 0.5 second steps. The 
default is 1 second. To alter the camera movement 
time: 

•  Use the up and down arrow keys to select the 

required setting. 

 

 i 

   Note 

This function can only be activated if the 
overview camera is a fixed camera. A setting of 
0 seconds disables the option. 

3.3.5

  Number of audience monitors 

The number of audience monitors (excluding the 
operator monitor) can be set to between 1 and 4. All 
audience monitors show the same picture. The 
default is 1 audience monitor. To alter the number of 
audience monitors: 

•  Use the up and down arrow keys to select the 

required setting. 

 
 
 
 

Bosch Security Systems B.V. | 2005 January | 9922 141 70491