Radio Shack 32-2057 Manual Do Utilizador

Notes: 
• Write down the CH setting for each audio source. Then, 

when you want to mix that source, you can adjust its 
volume to that setting.

• If it was necessary to set CH 1 to maximum to get a reading 

of 0 or less on the LED meter, slide CH 1 down to about 8 and 
adjust MASTER upward until you get a reading of 0 on both 
LED meters. 

1.  Turn on your microphone.

2.  Set OFF/ON/TALKOVER to ON.

3.  While talking, adjust DJ MIC until you get a signal reading 

of up to 0 on both LED meters.

4.   Set OFF/ON/TALKOVER to OFF.

MIC — connect a microphone 
with an XLR plug here

DJ MIC — adjusts volume of 
the microphone connected to 
the MIC jack.

MASTER —adjusts overall 
volume of sources connected 
to DJ MIC, CH1, CH2, and CH3.