Havis-Shields WGI-D22 Folheto
WGI-D22-INST-10-06
INSTALL INSTRUCTIONS WGI-D22
INTERIOR WINDOW GUARDS
2005-2006 DODGE MAGNUM
TOOLS REQUIRED:
Power drill
Drill bits – 1/8”, 5/32”
T-25 tamperproof torx bit
Phillips screwdriver
Phillips screwdriver
HARDWARE:
QTY DESCRIPTION
QTY DESCRIPTION
PART
#
1 Driver
Side
Window Guard
WGI-D22-1
1
Passenger Side Window Guard
WGI-D22-6
2
Upper mounting bracket
WGI-MB-12-90
8
#10 x ¾” Sheet metal screw
GSM33195
8
#10 x ½” Sheet metal screw
GSM33194
4
¼” x ½” T-25 Tamperproof bolts
GSM34190
4
¼” Flat Washers
GSM31005
Always
!
Read all instructions before installing any Havis-Shields Equipment Corp products.
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
SUBASSEMBLY:
1. Bend window guard so it contours the door as
shown in photo #1.
2. Determine the proper window guard for each
window.
3. If installing aluminum door panels refer to those
instructions at this time. They will need to be
installed first.
installed first.
Photo 1