GSI Outdoors 100 SERIES DRYER PNEG-552 Manual Do Utilizador
2. Safety Alert Decals
PNEG-552 100 Series Dryer
9
DC-974
Rotating auger will crush
and cut. Auto equipment
can start at anytime. Do not
enter until electric power is
locked in off position. Failure
to do so will result in serious
injury or death.
and cut. Auto equipment
can start at anytime. Do not
enter until electric power is
locked in off position. Failure
to do so will result in serious
injury or death.
WARNING!
Automatically controlled
belt drive can start at
anytime. Keep hands
clear. Failure to do so
could result in serious
injury.
belt drive can start at
anytime. Keep hands
clear. Failure to do so
could result in serious
injury.
DC-971
Moving parts can crush
and cut. Keep hands
clear. Do not operate
without guards in place.
Failure to do so could
result in serious injury.
and cut. Keep hands
clear. Do not operate
without guards in place.
Failure to do so could
result in serious injury.
DC-972
WARNING!
Decal DC-972 is located on the bottom auger belt guard and the front bearing plate
(which is visible when the bottom auger belt guard is removed). An alternate
location would be at the rear of the dryer for portable dryers equipped with the
Front Discharge Option.
(which is visible when the bottom auger belt guard is removed). An alternate
location would be at the rear of the dryer for portable dryers equipped with the
Front Discharge Option.
Decal DC-971 is located on the bottom auger belt guard and the front bearing
plate (which is visible when the bottom auger belt guard is removed). An
alternate location would be at the rear of the dryer for portable dryers equipped
with the Front Discharge Option.
plate (which is visible when the bottom auger belt guard is removed). An
alternate location would be at the rear of the dryer for portable dryers equipped
with the Front Discharge Option.
An additional location for decal DC-971 is the top auger belt guard (one on the belt
guard cover and another one is on the inside belt guard body visible when the belt
guard cover is removed).
guard cover and another one is on the inside belt guard body visible when the belt
guard cover is removed).
Decal DC-974 has several different locations. Two are located on the front end panel
below the fan/heater. Two are located on the rear end panel below the rear access
door. Two are located on the auger discharge box (one on the outside top and one on
the inside of the flapper lid next to the discharge mercury switch). One more of these
decals is located inside the plenum on the rear plenum closure door just inside the
rear access door.
below the fan/heater. Two are located on the rear end panel below the rear access
door. Two are located on the auger discharge box (one on the outside top and one on
the inside of the flapper lid next to the discharge mercury switch). One more of these
decals is located inside the plenum on the rear plenum closure door just inside the
rear access door.
Decal: DC-972
Decal: DC-971
Decal: DC-974