Human Touch Universal Remote 130 Folheto

Human Touch Confidential 

Page 1 

 

Human Touch

Initiator: MG 

Replaces: 

none

 

Title:

 

 

Purpose: To provide end users with the procedure for replacement of the iJoy-130  Remote Controller, 
Cable and Retractor assembly.  

Tools/Parts Required: Phillips Screwdriver (small), diagonal cutters 

 

Procedure:  
 

1) 

Turn off and unplug your iJoy 

2) 

Pull up on the Controller, revealing the three screw plugs. 

3) 

Remove all Three (3) screw covers from the assembly. You may do so with either 
your fingernails, or a small blade screwdriver or needle nose pliers. Take special 
care not to scratch or gouge the plastic.  

4) 

Remove all Three (3) Phillips screws securing the Controller Assembly to the chair 
arm frame. 

5) 

Carefully Lift up on the Controller Assembly.  

6) 

Locate the plug attaching the Controller to the Chair. Carefully disconnect. 

7) 

Reinsert the four (4) screws removed in step  

8) 

Reinstall the side panel assembly with the three screws removed in step 5. 

9) 

Plug the iJoy back into the wall outlet, and turn the Main Power Switch on. 

10) 

Test the chair for proper operation.