Bose 3A·2A·1 GSX system Manual Do Proprietário

For the highest quality video from DVDs, you may want to use a component video connection 
between the media center and the TV. To do so, your TV must provide component video jacks 
(typically labelled Y, Pb, and Pr). Refer to your TV owner’s guide for more information.

To make component video connections you will need a component video cable that is long 
enough to reach from the rear of the media center to your TV (Figure 15). If the cable is not 
supplied with your TV, you can purchase it separately.

On the media center rear panel, plug one end of the component video cable into the 
Component Y, Pb, and Pr video output jacks (Figure 15). Be sure to match the color of 
the plug with the color of the jack.

Plug the other end of the component video cable into the corresponding (color or letter 
code) component video jack on the back of your TV.

Media center rear panel

Component video output jacks:

TV connector 
panel (example)

Stereo cable

(red and white connectors)

Component

video cable

Input signals received by the C (Composite) or S-Video IN jacks are not passed through to 
the Component video OUT jacks. If you connect an external video device to the C or 



S-Video IN jack, you must also connect the C or S-Video OUT jack on the media center to 
the respective video input jack on your TV. To view the external video input on your TV, you 
will need to select the TV video input used for that device. To view the onscreen menus of the 
3•2•1 GSX system, you will need to switch back to the TV’s component video input.

Y (green)



Pb (blue)



Pr (red)