Benq Projector MW767 Manual Do Utilizador

Introduction

12

AUTO
Automatically determines the best 
picture timings for the displayed image. 
See

"Auto-adjusting the image" on page 

30

 for details.

Toggles the projector between standby 
mode and on.See 

"Starting up the 

projector" on page 29 

for details.

Lights up or flashes when the projector is 
under operation. See 

"Indicators" on 

page 96

 for detail.

TEMPerature indicator light
Lights up red if the projector's 
temperature becomes too high. See 

"Indicators" on page 96

 for details.

LAMP indicator light
Indicates the status of the lamp. Lights up 
or flashes when the lamp has developed a 
problem. See 

"Indicators" on page 96

 for 

details.

SOURCE
Displays the source selection bar. See 

"Switching input signal" on page 36

 for 

details.

MENU/EXIT
Turns on the On-Screen Display (OSD) 
menu. Goes back to previous OSD menu, 
exits and saves menu settings.

Manually corrects distorted images 
resulting from an angled projection. See 

"Correcting keystone" on page 32

 for 

details.

Adjusts the sound level.
When the On-Screen Display (OSD) menu 
is activated, the #2, and #3 keys are used 
as directional arrows to select the desired 
menu items and to make adjusents. See 

"Using the menus" on page 33

 for details.

MODE/ENTER
Selects an available picture setup mode. 
See 

"Selecting a picture mode" on page 39

for details.
Activates the selected On-Screen Display 
(OSD) menu item. See 

"Using the menus" 

on page 33

 for details.

ECO BLANK
Used to hide the screen picture. See 

"Hiding the image" on page 44

 for details.