Benq PE8700 Manual Do Utilizador

4. Basic Operation

15

■

The Power LED shines orange when power is 
applied and the power switch is in the on position.

■

Press and hold the ON key on the remote control 
or the STANDBY/ON key on the projector for 
ONE second to turn the projector on. The 
POWER LED will flash orange while warming up,  
then show a steady green. 

■

" Searching…." will be displayed on the screen 
before the projector identifies the input signal. This 
message will remain on the screen until a valid 
signal is detected. 

■

If the horizontal frequency of the input signal 
exceeds the range of the projector (XGA), a 
message reading " Not supportive timing " will be 
displayed on the screen. This message will remain 
on-screen until you change the input signal.

■

Adjust the projected image size you need with the 
zoom ring on the lens. To focus the image, rotate the 
focus ring on the lens.

Focus

Zoom in

Zoom out