Benq PB8263 Manual Do Utilizador
Operation
46
Control menu
FUNCTION
(default setting /
value)
value)
DESCRIPTION
(default setting / value)
Language
(English)
Language sets the language for the OSD control menus.
Use
Left/
Right to select the desired language from among English,
French, German, Italian, Spanish, Russian, Traditional Chinese, Simplified
Chinese, Japanese and Korean.
Chinese, Japanese and Korean.
OSD
OSD Pos.
(Center-bottom)
Selects a desired OSD position.
OSD Time
(10)
Sets the length of time the OSD will remain active after your last button
press. The range is from 5 to 60 seconds.
press. The range is from 5 to 60 seconds.
Setup
Source Scan
(On)
Sets whether the projector searches automatically for input signals. If the
source scan is on, the projector will search for input signals until it
acquires a signal. If the function is not activated, the projector selects the
last input signal.
source scan is on, the projector will search for input signals until it
acquires a signal. If the function is not activated, the projector selects the
last input signal.
Keystone Hold
(0)
When selected, preserves the last keystone correction value even when the
projector is restarted.
projector is restarted.
Mirror Hold
(0)
When selected, preserves the last mirror correction value even when the
projector is restarted.
projector is restarted.
Blank Time
(0)
Determines the length of time before the projector will automatically
shutdown when Blank is activated.
shutdown when Blank is activated.
Auto Off
(0)
Sets the length of time before the projector will automatically shutdown
when there is no input signal detected.
when there is no input signal detected.
User Logo
(Default)
Enables the user to select which logo screen will appear during projector
start-up. Three modes are available: Default (BenQ logo), black screen or
blue screen.
start-up. Three modes are available: Default (BenQ logo), black screen or
blue screen.
Preset Mode
(depends on the
selected input
source)
selected input
source)
Preset modes are provided so you can optimize your projector image set-
up to suit your program type.
up to suit your program type.
See
for details.
Reset
Returns all settings to the factory preset values.
The following settings will still remain: Phase, System, Language,
Keystone hold, Mirror hold, User logo, High Altitude, PIP H Position,
PIP V Position, PIP Brightness, PIP Contrast, PIP Color, PIP Tint, and
PIP Sharpness.
Keystone hold, Mirror hold, User logo, High Altitude, PIP H Position,
PIP V Position, PIP Brightness, PIP Contrast, PIP Color, PIP Tint, and
PIP Sharpness.