Gianni Industries GEM DG-101 Manual Do Utilizador

The DG-101 Digital Keyless Entry system

Operation User's Manual

1. Product Characteristic:

Allows up to 49+50 PIN codes

Dual relays programmable On/Off or pulsed or latched mode

Fully Programmable via keypad and master code

Door Reed Switch Input for Anti-Trailing

3 LED display with audible indication

Non-Volatile

Memory

Invalid PIN Lock-out

ABS

housing

With vandal resistant screws

ABS or optional luminous keypads

2. Specifications:

Operating Voltage: 12~24 Vdc

Current Draw: Average 15mA, Peak 60mA @ 12Vdc

Input: request-to-exit、Door Reed

Output: Dual relays, N.O./N.C./Com. Output (free voltage contact)

Relays Electric Current: 2A MAX @30Vdc ；0.4A @ 120Vac

Relay Activation Time: （＊100、＊200）

Strike Time: 1~99 seconds（adjustable）

Strike mode: Access Timer or Latch

Memory Volume: 49+50 PIN codes

Relay 1 is controlled by 001~049 user slots

Relay 2 is controlled by 050~099 user slots

PIN codes: 5 digit codes only

Operating Temperature: -20~+70℃

Ambient Humidity: 5~95% relative humidity non-condensing

Factory Master Code: 12345

Invalid PIN Lock-out: The system will shut down for 60 seconds while 32 codes of
incorrectly Master Codes enrolled or PIN codes attempted.

EPROM: Non-volatile memory, System will retain all programs and codes after a total
loss of power.

Surface mounting Installation:
SMB-750 housing is optional for
surface mount.

This series of request to exit can be
mounted directly in ANSI electrical box
(Flush mount)